Receptacles

Showing 1 - 7 of 7 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 20 More
  • Littelfuse
  • Pepperl + Fuchs
Pepperl + Fuchs
Male receptacle, M12/PG9, 4 pin, Number of pins: 4, Length: 500 mm
MFR: Pepperl + Fuchs
MFR #: V1S PG9 500
Item #: 698228
In Stock -
$33.06 each
Availability
Location Available Qty
Pepperl + Fuchs
Receptacles, M12/M16, 4 pin, Number of pins: 4, Length: 500 mm, Cores: 4 x 0.34 mm2 V1 M16H 500
MFR: Pepperl + Fuchs
MFR #: V1 M16H 500
Item #: 223275
Available to Order
$33.06 each
Availability
Location Available Qty
Littelfuse
SHOCK BLOCK CLASS A GFCI 208V 100A
MFR: Littelfuse
MFR #: SB5100-021-0
UPC: 079458313901
Item #: 1553505
Available to Order
$11805.55 each
Availability
Location Available Qty
Littelfuse
Shock Block Class A GFCI, 208V, 60A
MFR: Littelfuse
MFR #: SB5060-021-0
UPC: 079458294552
Item #: 1637840
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Littelfuse
Special-Purpose Ground-Fault Circuit Interrupter (SPGFCI), Class C and Class D: Industrial Shock Block (ISB) is a personnel protection device designed to meet the requirements for special-purpose GFCIs defined by UL 943C. This standard outlines GFCI classes specifically designed for use in industrial facilities. Class C GFCIs are intended to be used on three-phase systems where the line-to-line voltage is 480 V or less with a trip level of 20 mA, while Class D GFCIs are intended to be used on 600 V systems. The Industrial Shock Block includes DFT harmonic filtering, an automatic self-test feature and is compliant to the UL 1998 Software in Programmable Components standard. Ground-Fault Circuit Interrupter (GFCI), Class A: The Shock Block is available as a 208 V Class A GFCI, allowing commercial kitchens, construction sites, and other non-dwelling units with wet areas to meet NEC 210.8(B) for their 3-phase loads up to 60 A. Equipment Ground-Fault Protective Device (EGFPD): Industrial Shock Block is also available with adjustable protection settings as an EGFPD. The EGFPD models can be set to trip at 6 mA or from 10100 mA in increments of 10 mA. This offers more flexibility since GFCI devices are not allowed to have an adjustable trip level. Rating and Models: Industrial Shock Block (GFCI & EGFPD) is available for threephase voltages from 208 to 600 V with a maximum full load current of either 32 or 60 A. The power system can be either solidly or high-resistance grounded and the load must be three phase without a neutral. The standard enclosure is IP 69K/NEMA 4X and outdoor rated, suitable for all industrial environments including hightemperature washdown used in food production. A Class II, Division 2 option is also available for applications where explosive dust may be present. Ground Wire (Load-Ground) Monitor: The Industrial Shock Block also monitors the ground wire (load-ground) connection between the Industrial Shock Block and load. This is a required feature for Class C and D GFCI devices and is recommended for Class A GFCI and EGFPD devices. If the ground-return path is broken, the Industrial Shock Block will trip and provide an alarm by changing the state of the alarm contacts. This monitoring circuit includes an extra wire (pilot wire) between the Industrial Shock Block and load. At the load, the pilot wire is connected to a termination device. The other end of the termination device is connected to the load ground (typically the enclosure).
MFR: Littelfuse
MFR #: SB5060-201-0
UPC: 079458294507
Item #: 1559416
Available to Order
$9843.75 each
Availability
Location Available Qty
Littelfuse
Special-Purpose Ground-Fault Circuit Interrupter (SPGFCI), Class C and Class D: Industrial Shock Block (ISB) is a personnel protection device designed to meet the requirements for special-purpose GFCIs defined by UL 943C. This standard outlines GFCI classes specifically designed for use in industrial facilities. Class C GFCIs are intended to be used on three-phase systems where the line-to-line voltage is 480 V or less with a trip level of 20 mA, while Class D GFCIs are intended to be used on 600 V systems. The Industrial Shock Block includes DFT harmonic filtering, an automatic self-test feature and is compliant to the UL 1998 Software in Programmable Components standard. Ground-Fault Circuit Interrupter (GFCI), Class A: The Shock Block is available as a 208 V Class A GFCI, allowing commercial kitchens, construction sites, and other non-dwelling units with wet areas to meet NEC 210.8(B) for their 3-phase loads up to 60 A. Equipment Ground-Fault Protective Device (EGFPD): Industrial Shock Block is also available with adjustable protection settings as an EGFPD. The EGFPD models can be set to trip at 6 mA or from 10100 mA in increments of 10 mA. This offers more flexibility since GFCI devices are not allowed to have an adjustable trip level. Rating and Models: Industrial Shock Block (GFCI & EGFPD) is available for threephase voltages from 208 to 600 V with a maximum full load current of either 32 or 60 A. The power system can be either solidly or high-resistance grounded and the load must be three phase without a neutral. The standard enclosure is IP 69K/NEMA 4X and outdoor rated, suitable for all industrial environments including hightemperature washdown used in food production. A Class II, Division 2 option is also available for applications where explosive dust may be present. Ground Wire (Load-Ground) Monitor: The Industrial Shock Block also monitors the ground wire (load-ground) connection between the Industrial Shock Block and load. This is a required feature for Class C and D GFCI devices and is recommended for Class A GFCI and EGFPD devices. If the ground-return path is broken, the Industrial Shock Block will trip and provide an alarm by changing the state of the alarm contacts. This monitoring circuit includes an extra wire (pilot wire) between the Industrial Shock Block and load. At the load, the pilot wire is connected to a termination device. The other end of the termination device is connected to the load ground (typically the enclosure).
MFR: Littelfuse
MFR #: SB5060-011-0
UPC: 079458294521
Item #: 1359601
Available to Order
$9843.75 each
Availability
Location Available Qty
Pepperl + Fuchs
Male receptacle, M12/PG9, 5 pin, Number of pins: 5, Length: 500 mm, Cores: 5 x 0.34 mm2
MFR: Pepperl + Fuchs
MFR #: V15S PG9 500
Item #: 168846
Available to Order
$33.06 each
Availability
Location Available Qty