Testing and Measuring Instruments

Showing 529 - 576 of 595 Items

Sort By:

Per Page

Fluke

AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT Plus 1 AMP (48 - 65 HZ) ( percentage Reading Plus Floorspec), Enclosure: IP40 (IEC 529), Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output Cable, Operating Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 71 DEG C, Dimensions: 4.37 IN Width X 8.5 IN Length X 1.77 IN Depth, CAT III 600 V, CAT IV 300 V, For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes

MFR: Fluke

MFR #: I1000S

UPC: 095969090476

Item #: 238466

Available to Order

$1207.13 each

Availability

Location	Available Qty

Fluke

I1010 AC/DC Current Clamp

MFR: Fluke

MFR #: I1010

UPC: 095969048200

Item #: 41792

Available to Order

$861.10 each

Availability

Location	Available Qty

Fluke

Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

MFR: Fluke

MFR #: I200

UPC: 095969063937

Item #: 178448

Available to Order

$353.91 each

Availability

Location	Available Qty

Fluke

TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK

MFR: Fluke

MFR #: TP74

UPC: 095969078788

Item #: 96313

Available to Order

$48.96 each

Availability

Location	Available Qty

Fluke

The Fluke 1507 Insulation Tester is compact, rugged, reliable, and easy to use. With its multiple test voltages, it is ideal for many troubleshooting, commissioning, and preventative maintenance applications. Additional features, such as the remote probe on this tool, saves both time and money when performing tests. Insulation test range: 0.01 MO to 10 GO, Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V.

MFR: Fluke

MFR #: FLUKE-1507

UPC: 095969288675

Item #: 172888

Available to Order

$1354.07 each

Availability

Location	Available Qty

Dynatel

M-SERIES PIPE/CBL/FAULT/EMS LOCATOR UTIL 4.5" CPLR 12W

MFR: 3M Electrical Products

MFR #: 2573-ID/U12

UPC: 051115535444

Item #: 55648

Available to Order

$13371.05 each

Availability

Location	Available Qty

Dynatel

PIPE/CABLE/FAULT LOCATOR UTILITY 4.5 CPLR 3W

MFR: 3M Electrical Products

MFR #: 2573-U3

UPC: 051135331859

Item #: 814248

Available to Order

$10980.04 each

Availability

Location	Available Qty

Fluke

FLUKE-MDA-510 FLUKE MOTOR DRIVE ANALYZER 510 4-CHANNEL COLOR

MFR: Fluke

MFR #: Fluke-MDA-510

UPC: 095969870962

Item #: 1157877

Available to Order

$10920.98 each

Availability

Location	Available Qty

Fluke

PROBE, BARE THERMISTOR - TEFLON Type B: bare wire

MFR: Fluke

MFR #: 5611T-B

UPC: 095969369817

Item #: 707434

Available to Order

$1847.71 each

Availability

Location	Available Qty

Fluke

Diagnostic scope reel, compatible with FLK-DS701 and FLK-DS701 HD Diagnostic Scope

MFR: Fluke

MFR #: FLK-9MM/20M-Probe

UPC: 095969865807

Item #: 939893

Available to Order

$4492.29 each

Availability

Location	Available Qty

Fluke

Rugged, high-definition industrial 1280 x 720 resolution videoscope with wifi capability. 7 capacitive touch screen for accurate diagnostics in difficult to reach spaces. 720p video recording inspection camera. Up is Up technology rotates the display screen to allow for appropriate image display, regardless of the orientation of the probe. Save and share images directly from the videoscope using Fluke Connect. Attach images or video to an asset record or work order.

MFR: Fluke

MFR #: FLK-DS703-FC

UPC: 095969865722

Item #: 1186672

Available to Order

$5129.71 each

Availability

Location	Available Qty

Fluke

5000A FLUKE 1750 THIN FLEXI 61CM (24IN)

MFR: Fluke

MFR #: 3310-PR-TF-II

UPC: 095969757942

Item #: 359159

Available to Order

$3692.12 each

Availability

Location	Available Qty

Fluke

SCOPEM 2CH 500MHZ COL AMERICAS SCC

MFR: Fluke

MFR #: FLUKE-190-502/AM/S

UPC: 095969601795

Item #: 227875

Available to Order

$10208.40 each

Availability

Location	Available Qty

Fluke

SCOPEM 4CH 500MHZ COLOR AMERICAS SCC

MFR: Fluke

MFR #: FLUKE-190-504/AM/S

UPC: 095969696357

Item #: 256009

Available to Order

$10208.40 each

Availability

Location	Available Qty

Fluke

Fluke-1623-2 Basic Geo Earth Ground Tester Kit

MFR: Fluke

MFR #: FLUKE-1623-2/KIT

UPC: 095969666862

Item #: 567753

Available to Order

$7347.17 each

Availability

Location	Available Qty

Fluke

AC Current Clamp With BNC Output, Amperage Rating: 40 AMP: 0.5 - 40 AMP, 400 AMP: 5 - 400 AMP, Voltage Rating: 1000 VAC, Frequency Rating: 45 - 400 HZ, Operating Temperature: 0 - 50 DEG C, Dimensions: 5.09 IN Length X 2-3/4 IN Width X 1.18 IN Height, 2.5 MR Output Cable Length, Accuracy: 40 AMP: 2 PCT Plus 0.015 AMP, 400 AMP: 2 PCT Plus 0.04 AMP, 5 - 10 KHZ Typical Bandwidth, 32 MM Maximum Conductor Size, CSA And CE Certified, CAT IV 600 V, CAT III 1000 V

MFR: Fluke

MFR #: I400S

UPC: 095969268585

Item #: 199966

Available to Order

$587.75 each

Availability

Location	Available Qty

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 200 MHz and 2 channels. Includes C290 Hard-shell carrying case, SW90W FlukeView for ScopeMeter Test Tool and Windows Software.

MFR: Fluke

MFR #: FLUKE-190-202/AM/S

UPC: 095969601658

Item #: 143793

Available to Order

$7913.18 each

Availability

Location	Available Qty

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 60 MHz and 2 channels. Includes C290 Hard-shell carrying case, SW90W FlukeView for ScopeMeter Test Tool and Windows Software.

MFR: Fluke

MFR #: FLUKE-190-062/AM/S

UPC: 095969601368

Item #: 134612

Available to Order

$6647.07 each

Availability

Location	Available Qty

Fluke

MFR: Fluke

MFR #: FLUKE-190-202/AM

UPC: 095969601573

Item #: 143149

Available to Order

$7280.12 each

Availability

Location	Available Qty

Fluke

Two Piece Hanger Kit, For 1730 Energy Logger

MFR: Fluke

MFR #: Fluke-1730-Hanger

UPC: 095969674652

Item #: 553246

Available to Order

$179.06 each

Availability

Location	Available Qty

Discontinued

Fluke

REFERENCE PRESSURE GAUGE G70M

MFR: Fluke

MFR #: 2700G-G70M

UPC: 095969623568

Item #: 640588

Available to Order

$2861.23 each

Availability

Location	Available Qty

Discontinued

Fluke

This four channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.

MFR: Fluke

MFR #: 294-U115V

UPC: 095969287852

Item #: 682349

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

A selection of universal waveform generators offering superior performance and excellent value. This two channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces

MFR: Fluke

MFR #: 282-U115V

UPC: 095969287913

Item #: 682343

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

This one channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.

MFR: Fluke

MFR #: 291-U115V

UPC: 095969287784

Item #: 682347

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

A selection of universal waveform generators offering superior performance and excellent value. This one channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces

MFR: Fluke

MFR #: 281-U115V

UPC: 095969287883

Item #: 682342

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

This two channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.

MFR: Fluke

MFR #: 292-U115V

UPC: 095969287821

Item #: 682348

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Soft case compatible with many Fluke tools. The case top opens vertically for easy removal of tools with elastic loops inside to hold tools in place. A main storage section with a separate nylon pocket for storing accessories. Durable polyester design for long life. The case is compatible with many Fluke test tools including: T6 and T5 Series, T+/T+PRO, 110 Series, 170 Series, 233, 87V, 83V, 3000 FC, 70/370 FC Series, 902/902 FC, PRV240/PRV240FS, and 62 MAX/MAX+.

MFR: Fluke

MFR #: C60

UPC: 095969866705

Item #: 995229

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Test Lead Set, Included: Safety Designed Ground Leads, Shrouded Plugs And Notched Tip, Maximum Voltage: 600 VRMS, 1 AMP Maximum Current, Bandwidth: 12.5 MHZ, Length: 1.2 MR, For Use With The Fluke ScopeMeter 120 Series Hand Held Oscilloscopes

MFR: Fluke

MFR #: STL120-III

UPC: 095969601085

Item #: 397141

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

A selection of universal waveform generators offering superior performance and excellent value. This four channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces

MFR: Fluke

MFR #: 284-U115V

UPC: 095969287944

Item #: 682344

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

The fast one-handed tool for mA loop checks in Ex zones. The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2

MFR: Fluke

MFR #: FLUKE-707EX

UPC: 095969207287

Item #: 253503

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics. One of the leading wattage meters of the world, the multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit. Besides effectively performing basic tasks like measuring wattage, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.

MFR: Fluke

MFR #: FLUKE-345

UPC: 095969344999

Item #: 200691

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant

MFR: Fluke

MFR #: 8845A-EFPT

UPC: 095969370547

Item #: 370145

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Calculate energy loss in dollars. The Fluke 434 II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality.

MFR: Fluke

MFR #: FLUKE-434-II

UPC: 095969615532

Item #: 125418

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Leak Detector Flashlight, UV Refrigerant Detection Method, Temperature Rating: 0 - 50 DEG C, Power Supply: AAA Battery, 395 N-M Wavelength, Includes: Detachable Key Chain Carabiner And AAA Batteries, For HVAC Technicians

MFR: Fluke

MFR #: RLD2

UPC: 095969484923

Item #: 786542

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Blank insert

MFR: Fluke

MFR #: 9142-INSZ

UPC: 095969419796

Item #: 640585

Available to Order

$711.02 each

Availability

Location	Available Qty

Discontinued

Fluke

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert B features two wells each of 3/8, 1/4, and 3/16 inches in diameter for doing comparison calibrations.

MFR: Fluke

MFR #: 9103-B-156

UPC: 095969128605

Item #: 1121171

Available to Order

$8326.40 each

Availability

Location	Available Qty

Discontinued

Fluke

Fluke Calibration Industrial Dual-Block Thermometer Dry-Well Calibrator with Two 1/4 and Two 3/16 Inserts, Black Case, 110V, 50/60Hz.

MFR: Fluke

MFR #: 9009-B-156

UPC: 095969128421

Item #: 871581

Available to Order

$13464.14 each

Availability

Location	Available Qty

Discontinued

Fluke

Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with the 9103 Field Dry-Well. Insert D 9103.

MFR: Fluke

MFR #: 3103-6

UPC: 095969205573

Item #: 912644

Available to Order

$631.50 each

Availability

Location	Available Qty

Discontinued

Fluke

Need portability and extreme stability. Hart Micro-Baths have both. We invented the Micro-Bath. While many have tried to replicate it they can't use the proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. It is smaller and lighter than most dry-wells, has a spill-proof lid, and easy to carry. Micro-Baths can even be transported with the fluid in them. Range: -5 degrees Celsius to 125 degrees Celsius (23 degrees Fahrenheit to 257 degrees Fahrenheit)

MFR: Fluke

MFR #: 7102-156

UPC: 095969128254

Item #: 647228

Available to Order

$14501.04 each

Availability

Location	Available Qty

Discontinued

Fluke

This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.

MFR: Fluke

MFR #: 9100S-B-156

UPC: 095969205603

Item #: 500672

Available to Order

$4903.85 each

Availability

Location	Available Qty

Discontinued

Fluke

Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm

MFR: Fluke

MFR #: 9142-INSE

UPC: 095969419765

Item #: 903896

Available to Order

$835.76 each

Availability

Location	Available Qty

Discontinued

Fluke

For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)

MFR: Fluke

MFR #: 9132-156

UPC: 095969128865

Item #: 947797

Available to Order

$10529.63 each

Availability

Location	Available Qty

Discontinued

Fluke

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.

MFR: Fluke

MFR #: 9140-A-156

UPC: 095969128926

Item #: 912847

Available to Order

$7113.31 each

Availability

Location	Available Qty

Discontinued

Fluke

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.

MFR: Fluke

MFR #: 9140-B-156

UPC: 095969128940

Item #: 756371

Available to Order

$7113.31 each

Availability

Location	Available Qty

Discontinued

Fluke

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.

MFR: Fluke

MFR #: 9103-A-156

UPC: 095969128582

Item #: 822939

Available to Order

$8326.40 each

Availability

Location	Available Qty

Discontinued

Fluke

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.

MFR: Fluke

MFR #: 9150-A-156

UPC: 095969129046

Item #: 948022

Available to Order

$19186.59 each

Availability

Location	Available Qty

Discontinued

Fluke

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.

MFR: Fluke

MFR #: 9150-B-156

UPC: 095969129060

Item #: 948025

Available to Order

$19186.59 each

Availability

Location	Available Qty

Discontinued

Fluke

If you're calibrating IR guns at cold temperatures, this is for you. With solid-state cooling technology, this new IR calibrator reaches -30degrees Celsius (22degrees Fahrenheit) in standard ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice buildup on the target can be avoided. At the upper end of its range, the 9133 provides steady temperatures to 160degrees Celsius (320degrees Fahrenheit). With heating and cooling times of about 15 minutes from ambient to either extreme, this gets you to the temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-its factory calibrated to be within plus or minus0.4degrees Celsius (plus or minus0.7degrees Fahrenheit). No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart product to solve it. Range: -30 to 150degrees Celsius @ 23degrees Celsius ambient (-22 to 302degrees Fahrenheit @ 73degrees Fahrenheit ambient)

MFR: Fluke

MFR #: 9133-156

UPC: 095969128889

Item #: 691837

Available to Order

$14883.06 each

Availability

Location	Available Qty