Search Results
Content Results

Popular Searches

Top Products Matches

Top Content Matches

Test Leads

Showing 97 - 115 of 115 Items

Sort By:

Per Page

expand_less Brand (3)

expand_less Ways to Shop

Made in USA

expand_less Color

Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke 773 mA Clamp Meter is Flukes premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power. Need more hours in your day. Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time: Taking mA measurements by removing a wire and breaking the loop Calling the control room to isolate a loop Testing analog input/output on a console Troubleshooting devices with mA inputs and outputs Repairing intermittent or erratic 4-20 mA loops Going back to the shop to get extra tools. If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. Its designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Fluke

FLUKE-773 Milliamp mA Process Clamp Meter

MFR: Fluke

MFR #: FLUKE-773

UPC: 095969475822

Item #: 3431

Available to Order

$3007.23 each

Availability

Location	Available Qty

AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3

Fluke

AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3

MFR: Fluke

MFR #: I800

UPC: 095969401227

Item #: 200291

Available to Order

$676.24 each

Availability

Location	Available Qty

IDEAL, Lead Set Kit, Earth Resistance, Includes: Three Test Leads With Alligator Clips (5, 33, 33 MTR) On Reels, (2) Auxiliary Grounding Spikes

Ideal

IDEAL, Lead Set Kit, Earth Resistance, Includes: Three Test Leads With Alligator Clips (5, 33, 33 MTR) On Reels, (2) Auxiliary Grounding Spikes

MFR: Ideal Industries

MFR #: TL-796

UPC: 783250688319

Item #: 221149

Available to Order

$174.98 each

Availability

Location	Available Qty

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding

Fluke

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding

MFR: Fluke

MFR #: TP82

UPC: 095969261265

Item #: 287156

Available to Order

$147.19 each

Availability

Location	Available Qty

Automotive Back Probe Pin Set, Voltage Rating: 60 VDC, For Use With Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

Fluke

Automotive Back Probe Pin Set, Voltage Rating: 60 VDC, For Use With Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

MFR: Fluke

MFR #: TP40

UPC: 095969087513

Item #: 21263

In Stock - Check Availability

$107.73 each

Availability

Location	Available Qty

AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT Plus 1 AMP (48 - 65 HZ) ( percentage Reading Plus Floorspec), Enclosure: IP40 (IEC 529), Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output Cable, Operating Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 71 DEG C, Dimensions: 4.37 IN Width X 8.5 IN Length X 1.77 IN Depth, CAT III 600 V, CAT IV 300 V, For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes

Fluke

AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT Plus 1 AMP (48 - 65 HZ) ( percentage Reading Plus Floorspec), Enclosure: IP40 (IEC 529), Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output Cable, Operating Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 71 DEG C, Dimensions: 4.37 IN Width X 8.5 IN Length X 1.77 IN Depth, CAT III 600 V, CAT IV 300 V, For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes

MFR: Fluke

MFR #: I1000S

UPC: 095969090476

Item #: 238466

Available to Order

$1207.13 each

Availability

Location	Available Qty

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools

Fluke

I1010 AC/DC Current Clamp

MFR: Fluke

MFR #: I1010

UPC: 095969048200

Item #: 41792

Available to Order

$861.10 each

Availability

Location	Available Qty

Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

Fluke

Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

MFR: Fluke

MFR #: I200

UPC: 095969063937

Item #: 178448

Available to Order

$353.91 each

Availability

Location	Available Qty

TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK

Fluke

TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK

MFR: Fluke

MFR #: TP74

UPC: 095969078788

Item #: 96313

Available to Order

$48.96 each

Availability

Location	Available Qty

This Amprobe Test Lead Kit includes 48" long silicone lead wires, probe clips, spaced lugs, and fold out carrying case as well as spring loaded crimp tips and a red tip length extender.

Amprobe

This Amprobe Test Lead Kit includes 48" long silicone lead wires, probe clips, spaced lugs, and fold out carrying case as well as spring loaded crimp tips and a red tip length extender.

MFR: Fluke

MFR #: DL248D

UPC: 095969414647

Item #: 25267

Available to Order

$174.62 each

Availability

Location	Available Qty

Discontinued

No Image Available

Fluke

Test Lead Set, Included: Safety Designed Ground Leads, Shrouded Plugs And Notched Tip, Maximum Voltage: 600 VRMS, 1 AMP Maximum Current, Bandwidth: 12.5 MHZ, Length: 1.2 MR, For Use With The Fluke ScopeMeter 120 Series Hand Held Oscilloscopes

MFR: Fluke

MFR #: STL120-III

UPC: 095969601085

Item #: 397141

Available to Order

Availability

Location	Available Qty

Discontinued

No Image Available

Fluke

This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics. One of the leading wattage meters of the world, the multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit. Besides effectively performing basic tasks like measuring wattage, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.

MFR: Fluke

MFR #: FLUKE-345

UPC: 095969344999

Item #: 200691

Available to Order

Availability

Location	Available Qty

Discontinued

Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant

Fluke

Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant

MFR: Fluke

MFR #: 8845A-EFPT

UPC: 095969370547

Item #: 370145

Available to Order

Availability

Location	Available Qty

Discontinued

SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing

Fluke

SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing

MFR: Fluke

MFR #: TL225

UPC: 095969288781

Item #: 232057

Available to Order

Availability

Location	Available Qty

Discontinued

CABLEIQ QUALIFICATION TESTER

Fluke Networks

CABLEIQ QUALIFICATION TESTER

MFR: Fluke

MFR #: CIQ-100

UPC: 754082022602

Item #: 11791

Available to Order

Availability

Location	Available Qty

Discontinued

400A SWIVEL CLAMP

Amprobe

Amprobe's new swivel clamp meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC DC currents, voltage, resistance and capacitance as well as cat III 600 V safety ratings make this clamp on meter something you should swivel to see.

MFR: Fluke

MFR #: ACD-20SW

UPC: 095969498821

Item #: 4556

Available to Order

Availability

Location	Available Qty

Discontinued

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

Fluke

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

MFR: Fluke

MFR #: VPS220-R

UPC: 095969435833

Item #: 224255

Available to Order

Availability

Location	Available Qty

Discontinued

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

Fluke

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

MFR: Fluke

MFR #: VPS220-G

UPC: 095969435840

Item #: 224110

Available to Order

Availability

Location	Available Qty

Discontinued

Test Lead Set - PVC test lead set connects a compatible electrical test meter to a device for testing, Set includes two 48" lead wires, two standard probe tips, and two alligator clips, 3.26" alligator clips have 1.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips.

Amprobe

Test Lead Set - PVC test lead set connects a compatible electrical test meter to a device for testing, Set includes two 48" lead wires, two standard probe tips, and two alligator clips, 3.26" alligator clips have 1.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips.

MFR: Fluke

MFR #: MTL-45

UPC: 095969368162

Item #: 124159

Available to Order

Availability

Location	Available Qty