Power Tool Attachments

Showing 49 - 96 of 455 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 12 More
expand_less Ways to Shop
  • Greenlee
  • ILSCO
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-1/8" (28.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-1/8
UPC: 783310191414
Item #: 165064
In Stock -
$10.90 each
Availability
Location Available Qty
Greenlee
Spade Bit 1" Hole Diameter. 6-1/4" long with 1/4" hex shank. Bore hardwood, softwood, plywood and drywall. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling.
MFR: Greenlee
MFR #: 33A-1
UPC: 783310203575
Item #: 146171
Available to Order
$4.92 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme Shorty Wood Boring Auger Bit; 3/4 Inch, 7-5/8 Inch OAL, 5 Inch Flute
MFR: Greenlee
MFR #: 62PTS-3/4
UPC: 783310317920
Item #: 36792
In Stock -
$34.18 each
Availability
Location Available Qty
Greenlee
Holesaw Pilot Drill Bit 1/4" x 3-1/4" in 6 Pack. Pilot Drills Have Unique Split-Point Tip Design
MFR: Greenlee
MFR #: 38526
UPC: 783310385264
Item #: 181414
Available to Order
$38.45 each
Availability
Location Available Qty
Greenlee
Replacement Pilot Drill for Carbite-Tipped Hole Cutters. For cutters sized 3/4" - 2" (19mm - 50.8mm) using 3mm Hex Set Screw.
MFR: Greenlee
MFR #: 625-001
UPC: 783310398721
Item #: 3744
Available to Order
$10.48 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme 3/4" (19.1 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.
MFR: Greenlee
MFR #: 66PT-3/4
UPC: 783310309239
Item #: 163825
Available to Order
$41.88 each
Availability
Location Available Qty
Greenlee
Reciprocating Saw Blades 6" x 3/4" x .35" (152mm x 19.05mm x 8.89mm) 18 Teeth per Inch. Progressive-pitch reciprocating saw blades cut a wide range of standard construction materials quickly and cleanly - regardless of thickness. Bi-metal construction provides maximum flexibility and break resistance - plus lasting sharpness. Exclusive plunge tip makes starting cuts faster and easier.
MFR: Greenlee
MFR #: 353-618
UPC: 783310099659
Item #: 79649
Available to Order
$16.87 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-1/2" (63.5 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-1/2
UPC: 783310191629
Item #: 167028
In Stock -
$19.07 each
Availability
Location Available Qty
Greenlee
D'versiBIT Combination with Screw Point Auger Bit. 1/2" (12.7mm), 54" (1371.6mm) long with 3/16" (4.8mm) shaft diameter. For aggressive chip removal in many types of woods. Screw point for easy starting and pulling through wood With screw point removed, this bit can be ground to function like a standard combination bit.
MFR: Greenlee
MFR #: 08-03-54B
UPC: 783310380986
Item #: 117056
Available to Order
$75.30 each
Availability
Location Available Qty
Greenlee
Bit Extension, 12" with 1/4" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.
MFR: Greenlee
MFR #: 901-12
UPC: 783310027065
Item #: 121427
Available to Order
$21.80 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme 1" hole diameter. Improved cutting edge provides 30percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s. P.O.P packaged.
MFR: Greenlee
MFR #: 62PTS-1
UPC: 783310317982
Item #: 38458
Available to Order
$44.66 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (22.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-7/8
UPC: 783310191360
Item #: 164494
Available to Order
$10.43 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme 1" (25.4 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.
MFR: Greenlee
MFR #: 66PT-1
UPC: 783310309314
Item #: 165244
In Stock -
$51.24 each
Availability
Location Available Qty
Greenlee
Spade Bit 3/4" Hole Diameter. 6-1/4" long with 1/4" hex shank. Bore hardwood, softwood, plywood and drywall. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling.
MFR: Greenlee
MFR #: 33A-3/4
UPC: 783310203520
Item #: 145508
Available to Order
$4.51 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Blade for the 35713 6-3/8" Holesaw.
MFR: Greenlee
MFR #: 35721
UPC: 783310357216
Item #: 86760
Available to Order
$38.27 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 2-1/2" (63.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-2-1/2
UPC: 783310101628
Item #: 170003
Available to Order
$90.40 each
Availability
Location Available Qty
Greenlee
645-1-3/4 Quick Change 1-3/4 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-1-3/4
UPC: 783310057024
Item #: 45931
In Stock -
$60.24 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-3/4" (44.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-3/4
UPC: 783310191520
Item #: 170309
Available to Order
$14.46 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 12-24NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP12-24
UPC: 783310176152
Item #: 2684
In Stock -
$11.73 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-3/4" (44.4 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-3/4
UPC: 783310101604
Item #: 168584
Available to Order
$59.90 each
Availability
Location Available Qty
Greenlee
Holesaw Pilot Drill Bit 1/4" x 3-1/4". Pilot Drills Have Unique Split-Point Tip Design
MFR: Greenlee
MFR #: 39893
UPC: 783310398936
Item #: 8420
Available to Order
$6.63 each
Availability
Location Available Qty
Greenlee
Ultra Cutter Kit. Includes 7/8" - 2-1/2" cutters, two small arbors for extended assembly to 7/8" and 1-1/8" cutters, large arbor, hex wrench and case. For conduit sizes 1/2" - 2". Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 930
UPC: 783310102144
Item #: 173995
Available to Order
$403.96 each
Availability
Location Available Qty
Greenlee
645-2 Quick Change 2 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-2
UPC: 783310057031
Item #: 79203
Available to Order
$74.99 each
Availability
Location Available Qty
Greenlee
Large Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.
MFR: Greenlee
MFR #: 925-002
UPC: 783310102113
Item #: 173362
Available to Order
$12.63 each
Availability
Location Available Qty
Greenlee
Cobalt-steel pilot drill with split-point tip to prevent walking. For sizes 2-3/8" - 3". Use with 645-022 Arbor.
MFR: Greenlee
MFR #: 645-002
UPC: 783310057628
Item #: 146853
In Stock -
$14.51 each
Availability
Location Available Qty
Greenlee
Quick change arbor allows you to change cutter heads with a simple push and a turn use the same arbor for different size cutting heads.
MFR: Greenlee
MFR #: 645-022
UPC: 783310057536
Item #: 145681
Available to Order
$58.65 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw Kit for 1/2" - 2" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.
MFR: Greenlee
MFR #: 830
UPC: 783310191926
Item #: 187241
Available to Order
$140.88 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2" (50.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2
UPC: 783310191551
Item #: 166304
Available to Order
$14.46 each
Availability
Location Available Qty
Greenlee
6-7/8 STEEL TOOTH LIGHT HOLESAW
MFR: Greenlee
MFR #: 35715
UPC: 783310357155
Item #: 51067
Available to Order
$90.52 each
Availability
Location Available Qty
Greenlee
Quickest, most affordable way to cut perfect holes in ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting. Installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes. in very abrasive materialsand still stay sharp. Stabilizer spring balancescutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Fits a 3/8 IN drill chuck and can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris. Quickest, most affordable way to cut perfect holes inceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilotdrill eliminates changeover time. Fits a 3/8 IN drill chuckand can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris.
MFR: Greenlee
MFR #: 6923
UPC: 783310069232
Item #: 154046
Available to Order
$50.41 each
Availability
Location Available Qty
Greenlee
BLADE PKG,RECIP-9.00 X 8/10
MFR: Greenlee
MFR #: 353-969
UPC: 783310099901
Item #: 65768
Available to Order
$32.47 each
Availability
Location Available Qty
Greenlee
BLADE PKG,RECIP-8.00 X 18
MFR: Greenlee
MFR #: 353-818
UPC: 783310099765
Item #: 161868
Available to Order
$28.55 each
Availability
Location Available Qty
Greenlee
ARBOR .312 HEX BLST PKGD
MFR: Greenlee
MFR #: 38524
UPC: 783310385240
Item #: 51625
Available to Order
$22.87 each
Availability
Location Available Qty
Greenlee
DIE SET,6 TON (KC22)
MFR: Greenlee
MFR #: K22S1GL
UPC: 783310030782
Item #: 87657
Available to Order
$1922.76 each
Availability
Location Available Qty
Greenlee
DRILL/TAP, 10-32 (POP)
MFR: Greenlee
MFR #: LDTAP10-32
UPC: 783310009078
Item #: 500259
In Stock -
$16.29 each
Availability
Location Available Qty
Greenlee
HACKSAW BLADE -24T
MFR: Greenlee
MFR #: 333-1224
UPC: 783310100386
Item #: 136175
Available to Order
$16.89 each
Availability
Location Available Qty
Greenlee
EXTENSION,BIT (54 X 3/16) POP
MFR: Greenlee
MFR #: 3XT-54
UPC: 783310386865
Item #: 289936
Available to Order
$46.27 each
Availability
Location Available Qty
Greenlee
Cleans burrs from both sides of the hole in seconds, saving time and labor. Works with any hole size or shape 3/4 IN or larger. Use with existing drills, battery or electric-powered. Ensures safety, less chance of personnel or equipment being cut on sharp edges. Patent pending.
MFR: Greenlee
MFR #: 11170
UPC: 783310111702
Item #: 121903
Available to Order
$35.66 each
Availability
Location Available Qty
Greenlee
BIT,STEP 9,7MM (PKGD)
MFR: Greenlee
MFR #: 36018G
UPC: 783310360186
Item #: 993703
Available to Order
$49.88 each
Availability
Location Available Qty
Greenlee
34401C 1/2 inch Cobalt Metal Cutting Step Bit #1
MFR: Greenlee
MFR #: 34401C
UPC: 783310057895
Item #: 400477
Available to Order
$68.96 each
Availability
Location Available Qty
Greenlee
GSB12 1-3/8 inch Metal Cutting Step Bit #12
MFR: Greenlee
MFR #: GSB12
UPC: 783310082033
Item #: 1206529
Available to Order
$105.75 each
Availability
Location Available Qty
Greenlee
Durable split-point tip for fast, accurate material penetration.?Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.?Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.?Improved double flute design for superior chip evacuation, cutting speeds and tool life.?Three-flat shank for all 1/2 drill chucks.?Laser markings for quick, easy product and size identification. Replaced 30008 Also available for sale in a carton, qty. 25 (Cat #: GSB09-B UPC #: 783310082071?)
MFR: Greenlee
MFR #: GSB09
UPC: 783310082002
Item #: 1207053
In Stock -
$85.25 each
Availability
Location Available Qty
Greenlee
645-1-1/4 Quick Change 1-1/4 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-1-1/4
UPC: 783310056997
Item #: 200178
Available to Order
$44.78 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 5/8" (15.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-5/8
UPC: 783310056911
Item #: 41142
Available to Order
$33.01 each
Availability
Location Available Qty
Greenlee
645-3/4 Quick Change 3/4 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-3/4
UPC: 783310056935
Item #: 136461
Available to Order
$33.30 each
Availability
Location Available Qty
Greenlee
645-1 Quick Change 1 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-1
UPC: 783310056966
Item #: 200156
Available to Order
$38.08 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Cutter Kit, 8 Piece Complete Solutions for 1/2" to 2" conduit. Fast, accurate holes in stainless steel, mild steel, iron, copper, brass, aluminum, fiberglass and plastic sheet. Extends tool life with reduced friction, torque and heat. Split point, cobalt-steel pilot drill eliminates walking and penetrates quickly. Precision engineered, tungsten carbide teeth for fast cutting of round, burr-free holes. Optimized carbide placement reduces friction and torque requires less force and generates less heat while cutting. Flange Stop for Safety prevents over-drilling. Ejector Spring automatic slug removal with every cut.
MFR: Greenlee
MFR #: 648
UPC: 783310064015
Item #: 582231
Available to Order
$417.41 each
Availability
Location Available Qty
Greenlee
GSBSET3 Metal Cutting Step Bit Set #1, #4, and #9
MFR: Greenlee
MFR #: GSBSET3
UPC: 783310086086
Item #: 1209297
In Stock -
$184.65 each
Availability
Location Available Qty