Hole Saws

Showing 1 - 48 of 117 Items
Filters Clear Filters
expand_less Brand (1)
+ Show 1 More
expand_less Ways to Shop
  • Greenlee
Greenlee
Quick Change Carbide Tipped Hole Cutter Kit. Includes 7/8", 1-1/8", 1-3/8" and 2" Cutter Heads, Arbor, Hex Key and Case. Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 660
UPC: 783310057666
Item #: 121713
In Stock -
$283.89 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 7/8" (22.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-7/8
UPC: 783310101574
Item #: 166737
In Stock -
$35.13 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 7/8" (22.2 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-7/8
UPC: 783310056959
Item #: 160662
In Stock -
$34.01 each
Availability
Location Available Qty
Greenlee
Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable Includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility.
MFR: Greenlee
MFR #: 540-24
UPC: 783310105060
Item #: 1756
In Stock -
$99.36 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 1-1/8" (28.6 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-1-1/8
UPC: 783310056973
Item #: 159197
In Stock -
$39.64 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-1/8" (28.6 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-1/8
UPC: 783310101581
Item #: 167407
In Stock -
$39.40 each
Availability
Location Available Qty
Greenlee
Glo Stix Kit 3/16" x 15' (4.7mm x 4.6m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.
MFR: Greenlee
MFR #: 540-15
UPC: 783310114222
Item #: 177609
Available to Order
$62.64 each
Availability
Location Available Qty
Greenlee
Carbide-Tipped Hole Cutter 7/8" (22.2mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.
MFR: Greenlee
MFR #: 625-7/8
UPC: 783310383260
Item #: 150286
In Stock -
$51.30 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 1-3/8" (34.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-1-3/8
UPC: 783310057000
Item #: 39378
In Stock -
$46.80 each
Availability
Location Available Qty
Greenlee
Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable. 540-24 includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip..
MFR: Greenlee
MFR #: 540-12
UPC: 783310105046
Item #: 128735
Available to Order
$59.62 each
Availability
Location Available Qty
Greenlee
Glo Stix Kit 5/32" x 18' (4.0mm x 5.5m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.
MFR: Greenlee
MFR #: 540-18
UPC: 783310867968
Item #: 161221
In Stock -
$69.78 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 6-3/8" (162mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35713
UPC: 783310357131
Item #: 86096
In Stock -
$81.57 each
Availability
Location Available Qty
Greenlee
625-1-1/8 1-1/8 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 625-1-1/8
UPC: 783310383284
Item #: 160193
In Stock -
$58.88 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 6-5/8" (168mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35714
UPC: 783310357148
Item #: 65658
Available to Order
$90.52 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-3/8" (35 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-3/8
UPC: 783310101598
Item #: 167997
Available to Order
$49.88 each
Availability
Location Available Qty
Greenlee
Carbide-Tipped Hole Cutter Kit. Contains 7/8", 1-1/8" and 1-3/8" cutter heads, pilot drill, hex key and case. Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.
MFR: Greenlee
MFR #: 635
UPC: 783310035992
Item #: 38434
In Stock -
$165.22 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-3/8" (35.0 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-3/8
UPC: 783310191469
Item #: 171732
Available to Order
$11.55 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-1/8" (28.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-1/8
UPC: 783310191414
Item #: 165064
In Stock -
$10.90 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-1/2" (63.5 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-1/2
UPC: 783310191629
Item #: 167028
In Stock -
$19.07 each
Availability
Location Available Qty
Greenlee
Bit Extension, 12" with 1/4" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.
MFR: Greenlee
MFR #: 901-12
UPC: 783310027065
Item #: 121427
Available to Order
$21.80 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (22.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-7/8
UPC: 783310191360
Item #: 164494
Available to Order
$10.43 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Blade for the 35713 6-3/8" Holesaw.
MFR: Greenlee
MFR #: 35721
UPC: 783310357216
Item #: 86760
Available to Order
$38.27 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 2-1/2" (63.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-2-1/2
UPC: 783310101628
Item #: 170003
Available to Order
$90.40 each
Availability
Location Available Qty
Greenlee
645-1-3/4 Quick Change 1-3/4 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-1-3/4
UPC: 783310057024
Item #: 45931
In Stock -
$60.24 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-3/4" (44.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-3/4
UPC: 783310191520
Item #: 170309
Available to Order
$14.46 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-3/4" (44.4 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-3/4
UPC: 783310101604
Item #: 168584
Available to Order
$59.90 each
Availability
Location Available Qty
Greenlee
Ultra Cutter Kit. Includes 7/8" - 2-1/2" cutters, two small arbors for extended assembly to 7/8" and 1-1/8" cutters, large arbor, hex wrench and case. For conduit sizes 1/2" - 2". Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 930
UPC: 783310102144
Item #: 173995
Available to Order
$403.96 each
Availability
Location Available Qty
Greenlee
645-2 Quick Change 2 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-2
UPC: 783310057031
Item #: 79203
Available to Order
$74.99 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw Kit for 1/2" - 2" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.
MFR: Greenlee
MFR #: 830
UPC: 783310191926
Item #: 187241
Available to Order
$140.88 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2" (50.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2
UPC: 783310191551
Item #: 166304
Available to Order
$14.46 each
Availability
Location Available Qty
Greenlee
6-7/8 STEEL TOOTH LIGHT HOLESAW
MFR: Greenlee
MFR #: 35715
UPC: 783310357155
Item #: 51067
Available to Order
$90.52 each
Availability
Location Available Qty
Greenlee
Quickest, most affordable way to cut perfect holes in ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting. Installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes. in very abrasive materialsand still stay sharp. Stabilizer spring balancescutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Fits a 3/8 IN drill chuck and can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris. Quickest, most affordable way to cut perfect holes inceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilotdrill eliminates changeover time. Fits a 3/8 IN drill chuckand can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris.
MFR: Greenlee
MFR #: 6923
UPC: 783310069232
Item #: 154046
Available to Order
$50.41 each
Availability
Location Available Qty
Greenlee
EXTENSION,BIT (54 X 3/16) POP
MFR: Greenlee
MFR #: 3XT-54
UPC: 783310386865
Item #: 289936
Available to Order
$46.27 each
Availability
Location Available Qty
Greenlee
Cleans burrs from both sides of the hole in seconds, saving time and labor. Works with any hole size or shape 3/4 IN or larger. Use with existing drills, battery or electric-powered. Ensures safety, less chance of personnel or equipment being cut on sharp edges. Patent pending.
MFR: Greenlee
MFR #: 11170
UPC: 783310111702
Item #: 121903
Available to Order
$35.66 each
Availability
Location Available Qty
Greenlee
645-1-1/4 Quick Change 1-1/4 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-1-1/4
UPC: 783310056997
Item #: 200178
Available to Order
$44.78 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 5/8" (15.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-5/8
UPC: 783310056911
Item #: 41142
Available to Order
$33.01 each
Availability
Location Available Qty
Greenlee
645-3/4 Quick Change 3/4 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-3/4
UPC: 783310056935
Item #: 136461
Available to Order
$33.30 each
Availability
Location Available Qty
Greenlee
645-1 Quick Change 1 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-1
UPC: 783310056966
Item #: 200156
Available to Order
$38.08 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Cutter Kit, 8 Piece Complete Solutions for 1/2" to 2" conduit. Fast, accurate holes in stainless steel, mild steel, iron, copper, brass, aluminum, fiberglass and plastic sheet. Extends tool life with reduced friction, torque and heat. Split point, cobalt-steel pilot drill eliminates walking and penetrates quickly. Precision engineered, tungsten carbide teeth for fast cutting of round, burr-free holes. Optimized carbide placement reduces friction and torque requires less force and generates less heat while cutting. Flange Stop for Safety prevents over-drilling. Ejector Spring automatic slug removal with every cut.
MFR: Greenlee
MFR #: 648
UPC: 783310064015
Item #: 582231
Available to Order
$417.41 each
Availability
Location Available Qty
Greenlee
Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 39.5" (57.1mm x 127mm x 1003.3mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.
MFR: Greenlee
MFR #: 921-36
UPC: 783310124153
Item #: 111930
Available to Order
$53.20 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1" (25.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1
UPC: 783310191384
Item #: 187771
Available to Order
$10.90 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Blade for the 35712 4-3/8" Holesaw.
MFR: Greenlee
MFR #: 35720G
UPC: 783310357209
Item #: 2534
Available to Order
$34.96 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 2" (50.8 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-2
UPC: 783310101611
Item #: 169321
Available to Order
$67.65 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-7/32" (30.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-7/32
UPC: 783310016434
Item #: 144453
Available to Order
$44.44 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 3-5/8" (92.1 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-3-5/8
UPC: 783310191728
Item #: 168367
Available to Order
$21.26 each
Availability
Location Available Qty
Greenlee
625-1-3/8 1-3/8 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 625-1-3/8
UPC: 783310383314
Item #: 139398
In Stock -
$65.82 each
Availability
Location Available Qty
Greenlee
Carbide Grit Hole Saw 3-5/8" (92.1mm). Long-lasting tungsten carbide-grit delivers extremely clean, smooth cuts through tile, cement board, and other abrasive materials. Perfect for cutting holes in Quazite enclosure or hardy board siding for 3-0 box installation. Rugged construction for enduring performance. Use with Arbors.
MFR: Greenlee
MFR #: 725-3-5/8
UPC: 783310100812
Item #: 188118
Available to Order
$122.75 each
Availability
Location Available Qty
Greenlee
EXTENSION, BIT (7/16"X12")
MFR: Greenlee
MFR #: 904H-12
UPC: 783310349808
Item #: 177658
Available to Order
$73.11 each
Availability
Location Available Qty